Leo's Blog Discussion Mega-Thread

[ZenSwift]

9 hours ago, Leo Gura said:

As a matter of fact I do.

Thankyou. 

Looking forward to it. 

[No1Here2c]

2 hours ago, Joseph Maynor said:

Is Omniscience a goal or a state?  Both of these it seems cannot be true at the same time.

Omniscience is an active process. State dependent/related.

The ego can place just about anything as a goal.

Edited 3 hours ago by No1Here2c

[No1Here2c]

Just now, No1Here2c said:

The ego can place just about anything as a goal.

My goal can be to become a velociraptor.

[No1Here2c]

Trust in the Devices

[UnbornTao]

9 hours ago, Vynce said:

Apparently when you zoom deep enough into your body, you see AI slop.

Is it AI? Curious to know.

[No1Here2c]

What isnt the slop of conscious unfoldment?

Consciousness is a fluid container. The flow of slop presents itself to you at all times!

Miraculous!

[No1Here2c]

Infinity has slopped you right of itself!

[No1Here2c]

Trust in the angelic tools we have available!

AI can be quite the valuable device if you understand the proper protocol.

AI can shift your perspective in one swift motion, it can be utilized to uncover blindspots & even to translate morse code!

[No1Here2c]

One of the problems I see with AI is the risk of dependency.

You want to be fully secure & integrated in & of yourself.

From this position, AI can be effectively utilized for consciousness work.

Edited 4 hours ago by No1Here2c

[No1Here2c]

Leo, not sure if you've confirmed this or not yet, I dont pay too much attention here, 

I wonder will you be recording the lectures you give in person so as to be shared online?

Perhaps a blog post or two?

Edited 4 hours ago by No1Here2c

[No1Here2c]

1 minute ago, No1Here2c said:

I dont pay too much attention here

You will typically find me working away in the About Me section of my Profile! (Keep that private please)

I find it to be a highly effective area for me to focus in contemplation!

Also a lovely place to allow my passion for the work to shine through to the Angels up Above!

[No1Here2c]

@Leo Gura

Is the About Me section private to my eyes only?

Maybe allow some of the Mods to see and You but please not all the rest ;}

Edited 3 hours ago by No1Here2c

[No1Here2c]

Have I made a grave error in the pointing out of this location?

[No1Here2c]

Observe here a glimpsing screenshot of my most recent workings lol

I like to utilize it as a space for the refinement of my Understanding, Contemplation, and Madman Ideas! ;}

Edited 3 hours ago by No1Here2c

[No1Here2c]

45 minutes ago, UnbornTao said:

Is it AI? Curious to know.

Beautiful AI creation if so.

Ive seen much much worse trust ;}

[No1Here2c]

I Love my Winks & Smiles!

;}

[Franz_]

@No1Here2c  and you won't succeed ):

[Natasha Tori Maru]

One pitfall to the laser printer are Drum cartridge replacements. 

The drum is the cylinder inside that is polarised by static, the toner sticks to it and the drum rolls it over the page to run through the fuser to adhere it to the paper.

Over time, and many thousands of prints, these drums wear down and must be replaced. The printer will come to a full stop. There is a drum for every colour (cyan, magenta, black, yellow). 

The drums are very expensive. However, they last a long time!

Just thought I would note the additional consumable.

NB I used to run a huge professional print house using laser, inkjet and offset printing.

Fun fact #1 - almost every printer images a tiny yellow dot raster (MIC) onto every page, that identifies the printer. Date, time and serial number are printed, invisible to the eye. 

Edited 2 hours ago by Natasha Tori Maru

[No1Here2c]

18 minutes ago, Franz_ said:

@No1Here2c  and you won't succeed ):

You know damn well I'll become a Velociraptor!

[No1Here2c]

32 minutes ago, Franz_ said:

@No1Here2c  and you won't succeed ):

I have a Fierce Determination.

Fearless!