I need to build a Tiny Home thats MCS and EMF safe

[Elliott]

Just now, integral said:

But the total cost of all of that is around 25-30k because of the eco residential zoning laws. But we will see.

That's not bad.

[integral]

3 minutes ago, Elliott said:

That's not bad.

Yeah I'm trying to get the purchasing of the land and everything else necessary to all fit under 150k. 

[Elliott]

40 minutes ago, integral said:

Yeah I'm trying to get the purchasing of the land and everything else necessary to all fit under 150k. 

If you're only doing the framing and roofing, you should get a price for someone to just do the entire house, you're just doing the cheap labor stuff. Especially if a recession hits, labor will be even cheaper.

You can look for a company that will build it at their shop and deliver it.

You still want a great design though, no one knows how to build. Make sure the building area is elevated to reduce moisture with the wood and interior. Maybe splurge for custom white oak boards at the bottom, you don't need treated fir above that, is boiled linseed oil 'toxic' for the exterior? The video is untreated wood.

Also, I found a $2k fantech HRV brand new for $150 on marketplace, if you keep an eye out. My water heaters too, found brand new ones cheap. If you know what you're looking for, you can look for circuit breakers too.

Edited 5 hours ago by Elliott

[Natasha Tori Maru]

Are you just filtering for TVOC or pm2.5 & pm10 also?

If custom, plans for design will cost you. Set aside cash for that. I don't know how building permits work where you are, but here you need a set of plans passed and assessed/prepared. Structural set are usually emphasised. It sounds like you will need to subcontract more than you realise. Hydraulics, electrical, structural (carpentry).

What about fire safety? 

I still think you are aiming for way too specialised with even 110k budget.

[integral]

7 minutes ago, Natasha Tori Maru said:

Are you just filtering for TVOC or pm2.5 & pm10 also?

If custom, plans for design will cost you. Set aside cash for that. I don't know how building permits work where you are, but here you need a set of plans passed and assessed/prepared. Structural set are usually emphasised. It sounds like you will need to subcontract more than you realise. Hydraulics, electrical, structural (carpentry).

What about fire safety? 

I still think you are aiming for way too specialised with even 110k budget.

https://tumbleweedhouses.com/
The prebuilt tiny homes in my area cost roughly 100,000 at the base price. At about 350 ft.² +.

I figured if I bought a kit "lego", I could subcontract the electrical, plumbing and maybe the metal roof/insulation.  And save overall cost.

Or i can get it custom made by the contractor make sure they put wool insulation and have it shipped to the property.

Quote

Are you just filtering for TVOC or pm2.5 & pm10 also

No, actually the particles of the least important. I need a uncontaminated air source from the outdoors, and then from there, just a basic HEPA filter we'll do the job. 

[Elliott]

17 minutes ago, integral said:

https://tumbleweedhouses.com/
The prebuilt tiny homes in my area cost roughly 100,000 at the base price. At about 350 ft.² +.

I'd look for a solid-wood shed builder. Your plumber can prepare the underground plumbing before it arrives. It doesn't need to be a trailer like those, they can deliver huge sheds off their trailer.

 

https://northcountrysheds.com/cabins

 

Edited 3 hours ago by Elliott

[Elliott]

$18k 390sqft. Delivers to Quebec, not solid wood, but any of these companies should do it.

https://northcountrysheds.com/cabins

Edited 3 hours ago by Elliott

[Natasha Tori Maru]

@integral if you buy a pre-built box and then contract out the services, that makes it a lot easier than doing the whole shebang from scratch. I think it's a much better plan tbh 

You might need a geotechnical consultant to assess where you plan to put it. Not sure. They will tell you soil types and stability, what is suitable for that location 

[integral]

41 minutes ago, Natasha Tori Maru said:

if you buy a pre-built box and then contract out the services

https://www.avramecanada.ca/floorplans/trio-100

Maybe like this.

[integral]

2 hours ago, Elliott said:

$18k 390sqft. Delivers to Quebec, not solid wood, but any of these companies should do it.

https://northcountrysheds.com/cabins

Ya does are pretty good for the price but there is no insulation i assume. 

Some issues 

• LP Smart Siding is engineered wood (contains resins/adhesives)
• Plywood flooring has glue
• Architectural shingles are petroleum-based
• Standard insulated door may have foam core

Edited 59 minutes ago by integral

[integral]

5 hours ago, Elliott said:

If you're only doing the framing and roofing, you should get a price for someone to just do the entire house, you're just doing the cheap labor stuff. Especially if a recession hits, labor will be even cheaper.

You can look for a company that will build it at their shop and deliver it.

You still want a great design though, no one knows how to build. Make sure the building area is elevated to reduce moisture with the wood and interior. Maybe splurge for custom white oak boards at the bottom, you don't need treated fir above that, is boiled linseed oil 'toxic' for the exterior? The video is untreated wood.

Also, I found a $2k fantech HRV brand new for $150 on marketplace, if you keep an eye out. My water heaters too, found brand new ones cheap. If you know what you're looking for, you can look for circuit breakers too.

Ya at that point ill get a ket and higher contractor to finish everything, but i dont see how i can do it under 150k

[Leo Gura]

Any construction grade wood will be heavily treated with chemcials. And if it isn't, it will get moldy and rotten.

Your needs are unreasonable.

Have you considered a yurt?

[Elliott]

8 minutes ago, integral said:

Ya does are pretty good for the price but there is no insulation i assume. 

Some issues 

• LP Smart Siding is engineered wood (contains resins/adhesives)
• Plywood flooring has glue
• Architectural shingles are petroleum-based
• Standard insulated door may have foam core

These are just small companies, they'll build it however you want. They say free estimates.